Lucent Technologies M770 - Manual (Page 31)

Chapter 4 Fault Management
Cajun M770 ATM Switch Manager User’s Guide 21
Editing Severity Degrees
Severity degrees may be changed for faults on a system-wide basis, or for specific hubs
(per IP).
Caution: Do not change the Event Object Identifier of a fault.
Editing Severity Degrees System-Wide
To edit severity degree settings system-wide:
1 Select the enterprise which contains the fault whose settings you want to edit. A list
of the faults under the enterprise appears in the
Event Identification window.
2 Select the fault whose settings you want to edit.
3 Open the Edit menu and select Modify Event .
OR
Double-click the fault whose settings you want to edit. The Event Configurator
window appears.
4 Change the severity setting using the Severity pull-down list.
5 Click OK .
6 Save the changes.
— In HP OpenView: Select File
Save .
— In NetView: Click Apply .
Editing Severity Degrees for Specific Hubs
To edit severity degree settings for specific hubs:
1 Select the enterprise which contains the fault whose settings you want to edit. A list
of the faults under the enterprise appear in the
Event Identification window.
2 Select the fault whose settings you want to edit.
3 Copy the fault by opening the Edit menu and selecting Copy Event . The Event
Configurator window appears.
4 Enter a name for the fault in the Event Name field.
5 Set Source to the IP address/es of the specific hub/s you want the changes to be
effective on.
6 Change the severity setting using the Severity pull-down list.
7 Click OK .
8 Save the changes.
— In HP OpenView: Select File
Save .
— In NetView: Click Apply .