Kodak EasyShare 5500 - Manual (Page 75)

Scan
Scan to memory card
1 Insert a memory card into the appropriate card slot.
WARNING
Never attempt to remove a memory card while it is being accessed. Doing so may damage
files on the card. You can safely remove a card only when the status light next to the slots is
not blinking.
2 Load your original face down on the rear left-hand corner of the scanner glass.
3 Press Scan to display the Scan menu.
4 Press
_
or
`
to select Document.
5 Press
b
to select Scan To.
6 Press
_
or
`
to select Memory Card.
7 Press Start.
User’s Guide 71