Kodak EasyShare 5500 - Manual (Page 108)

Chapter 9
Probable cause 2
The brightness setting for copies is set too light.
Adjust the brightness setting to darker.
See Change brightness or Copy settings.
Copies too light or dark
The brightness setting for copies is set too light or dark.
Adjust the brightness setting for copies.
See Change brightness or Copy settings.
Copy cut off
The original is larger than the paper loaded.
When the original is larger than the paper loaded, use the Fit to Page option to reduce your original to the
size of the paper loaded.
Scan troubleshooting
Scan fails
Probable cause 1
Your computer is not turned ON.
Turn on your computer.
Probable cause 2
Your AiO printer is not connected to your computer.
Connect your EasyShare AiO to your computer with a 2.0 USB cable.
Probable cause 3
The AiO printer Home Centre software is not installed.
Insert the Kodak EasyShare 5000 All-in-One Printer installation CD and install the software.
Probable cause 4
Your computer system resources may be low.
1 Turn off your computer and AiO printer and then turn them back on.
2 If the problem still persists, try scanning at a lower resolution.
104 Kodak EasyShare 5500 AiO