Handling and loading paper, The scanner glass – Kodak EasyShare 5500 User Manual
Page 33
3
Handling and loading paper
User’s Guide
29
Handling and loading paper
Use the following guidelines when handling paper:
To avoid fingerprints, handle the paper by the edges as much as possible.
Avoid touching the glossy side of the photo paper.
Keep the input and 150 x 100 mm (6 x 4") paper trays closed to keep out dust and debris.
Store paper flat.
Keep paper away from direct sunlight and out of high-temperature environments (such as a vehicle
parked in the sun).
You can load many different types and sizes of paper in your Kodak AiO printer, including letter paper,
photo paper, transparencies and envelopes (see Paper types in the Appendix). The AiO printer
automatically detects the size and type of paper you load in the input tray and then adjusts to generate the
highest quality output for that paper.
The scanner glass
The scanner glass or automatic document feeder is where you place originals for copying, scanning or
faxing.
1
Lift the lid and place your original face down on the rear left-hand corner of the scanner glass or place a
stack of originals (up to 35 sheets of 75 gsm [20 lb] plain paper) face up in the automatic document
feeder.