Kodak EasyShare 5500 - Manual (Page 29)

Getting started
Separate fax line (no voice)
Connect your Kodak AiO printer to the phone line as shown in the illustration if you have a separate fax
line on which you receive no voice calls and you have no other equipment connected to this phone line.
1 Connect the phone cord supplied with your AiO printer to your telephone wall jack and the port labelled
1-LINE.
2 Set Answering Machine Mode on your All-in-One to On.
When the phone rings, your AiO printer will answer automatically after the number of rings you set in the
Rings to Answer setting. It will then send fax reception tones to the sending fax machine and receive the
fax.
Shared voice/fax line
Your All-in-One will not be able to distinguish between fax and voice calls with this connection. Therefore
you will need to answer voice calls before your AiO printer answers. The default setting for Rings to
Answer is 4.
1 Connect the phone cord supplied with your AiO printer to your telephone wall jack and the port labelled
1-LINE.
2 Connect your phone to the port labelled 2-EXT on the back.
Your All-in-One will not be able to distinguish between fax and voice calls with this connection. Therefore,
you will need to answer faxes manually.
User’s Guide 25