Kodak EasyShare 5500 - Manual (Page 12)

Chapter 1
Card slot light
Light status Cause Action/Solution
Light is off. An SD/MMC card is not inserted
or is improperly inserted in the
card slot. Remove and reinsert the
SD/MMC card.
Light is on. An SD/MMC card is properly
inserted in the card slot. None
Slow blink: The internal card
reader is initialising or
communicating with the printer. None Light blinks green.
Fast blink: There is a card or
communication error. Remove the card and make sure
the card is not "write" protected
or damaged. Reinsert the card or
replace with a new card if
necessary.
LCD display screen
The LCD screen displays photos, messages, instructions and menu parameters. Menu navigation is
accomplished using the 4-way navigation buttons. The screen is hinged on the back edge and can be
positioned from flat on the control panel surface to vertical.
Instructions displayed on photos appear for up to four seconds and then disappear, or disappear
immediately after you start interacting with the screen. The instructions will return after fifteen seconds of
inactivity.
When a second page of display text is present, it is indicated by the down arrow
b
symbol, positioned in
the lower right-hand corner of the menu area. When the second or subsequent page of text is in view, the
presence of a previous page is indicated by the up arrow
a
symbol in the top right-hand corner of the
menu area.
Each time you press Navigate Down (
b
), you advance the highlight down 1 row. When the last row is
highlighted, pressing
b
causes page 1 to be replaced with page 2. When page 2 appears, the highlight is on
the top row. The up arrow
a
symbol appears at the right-hand edge. If a third page of menu parameters is
available, the down arrow
b
symbol appears in the lower right-hand corner. Until the highlight is
advanced, pressing Navigate Up (
a
) returns you to the previous page. Holding down any of the 4-way
Navigation buttons causes them to repeat (scroll).
8 Kodak EasyShare 5500 AiO