Konica Minolta 7235 - Manual (Page 93)

4-14. LDAP Setup
II Network Setup - Administrators only
84
Chapter 4 Setting from the Control Panel
LDAP Server Setup (Part 4of 4)
1
Use [ ] and [ ] to access to [LDAP Server Setup] screen (4/4) from screen (3/4).
● When [OFF] is selected for [User authentication] on the previous page, be sure to set this item.
● When [ON] is selected for [User authentication] on the previous page, the settings for this item are not
saved. If the settings for this item have already been made, selecting [ON] deletes the user name and
password.
z For details on the procedure for displaying the [Network setting] screen, refer to [4-2.Method for Setting Network from
Control Panel] (
Page 23).
User Name
Sets the User Name to access the LDAP server.
z Only half-width alphanumeric characters can be used for User Name.
1
Touch the [User Name] key.
2
Enter the user name on the [Data Input] screen.
3
Touch the [OK] key on the [Data Input] screen.
Password
Sets the Password for accessing the LDAP server.
1
Touch the [Password] key.
2
Enter the password on the [Data Input] screen.
3
Touch the [OK] key on the [Data Input] screen.