Enable ipp, Accept ipp job – Konica Minolta 7235 User Manual
Page 55
4-6. IPP Setup
II Network Setup - Administrators only
46
Chapter 4 Setting from the Control Panel
IPP setup (Part 1 of 4)
1
Access to [IPP Setup] screen (1/4) from [Network setting] screen.
z
For details on the procedure for displaying the [Network setting] screen, refer to [4-2.Method for Setting Network from
Control Panel] (
Page 23).
z
Use [
] and [
] to switch the screen.
Enable IPP
This setting activates and deactivates IPP.
1
Touch either the [ON] or [OFF] key on the [Enable IPP] screen.
[ON] :Enables IPP
[OFF] :Disables IPP
Accept IPP Job
1
Touch either the [YES] or [NO] key on the [Accept IPP job] screen.
[YES] :Sets the machine to accept IPP job
[NO] :Sets the machine to decline IPP job
z
The factory default setting is [YES].