Scan mode – Konica Minolta 7235 User Manual
Page 213
8-2. Scanner Initial Settings
IV Scanner Key Operator - Administrators only
204
Chapter 8 Key Operator Settings
Scan Mode
This sets the scanning mode.
z
The factory default is [One sided].
1
Select [Scan mode] in [Initial setting] screen.
When you touch the [
] or [
] key, the selection item is switched.
z
For details on the procedure for displaying the [Initial setting] screen, refer to [Switching the Key Operator Mode]
(
2
Touch the [EDIT] key, then change the setting.
Each time you touch the [EDIT] key, the setting is switched.
Two sided
→ One sided
3
Touch the [RETURN] key.
From now on, the copier operates in accordance with this settings.