Konica Minolta 7235 - Manual (Page 214)

8-2. Scanner Initial Settings
205
IV Scanner Key Operator - Administrators only
Chapter 8 Key Operator Settings
Disable Entry Function
z The factory default is [NO].
1
Select [Disable Entry Function] in [Initial setting] screen.
When you touch the [ ] or [ ] key, the selection item is switched.
z For details on the procedure for displaying the [Initial setting] screen, refer to [Switching the Key Operator Mode]
(
Page 190).
2
Touch the [EDIT] key, then change the setting.
Each time you touch the [EDIT] key, the setting is switched.
YES ↔ NO
3
Touch the [RETURN] key.
From now on, the copier operates in accordance with this settings.
This screen is displayed when [Disable Entry Function] is set to [Yes].