Konica Minolta 7235 - Manual (Page 120)

5-9. E-mail Receive (POP) Configuration
111
II Network Setup - Administrators only
Chapter 5 Web Utility
Changing E-mail Receive (POP) Setting
The following E-mail Receive (POP) settings may be changed as noted.
„ Enable POP
„ POP Server Address
„ POP Server Port Number
„ Login Name
„ Password
„ POP Server Connection Timeout
„ Interval Time
To alter any of these E-mail Receive (POP) settings, follow these steps:
1
Open the E-mail Receive (POP) configuration page.
2
In the E-mail Receive (POP) Settings section, select the field you wish to change.
3
Enter the new settings.
4
At the bottom of the page, type in the system password in the provided field.
5
Click [Apply].
● Changes do not take effect until you start the copier. Be sure to wait at least 10 seconds after turning off
the main power switch before you turn the copier back on.