Konica Minolta 7235 - Manual (Page 178)

6-4. Scanning Documents
169
III Scanner
Chapter 6 Using the Scanner Functions
„ Independent X and Y magnification ratios
Touch the or key, then specify the zoom ratio with [ ▲] [▼] or the copier’s ten-key.
„ Same size (1.00)
Touch the [1.00] key.
3
Touch the [OK] key.
→ The display returns to the [Original mode] screen.
2
Set the document on the copier RADF or the platen glass.
When scanning in real mode, proceed to Step 4.
z For detailed settings, refer to [Application Function Settings] ( Page 171).
z After setting the application functions, always return the LCD screen to the [Scanner mode basic] screen.
3
When scanning in memory mode, touch the [STORE] key.
→ The memory mode is set.
From now on, when you touch the (START) key, the document will be scanned.
When scanning of all the documents is complete, touch the [STORE] to proceed to Step 4.