Scan w/o key count – Konica Minolta 7235 User Manual
Page 205
8-2. Scanner Initial Settings
IV Scanner Key Operator - Administrators only
196
Chapter 8 Key Operator Settings
Scan W/O key count
This sets whether to enable scanning or disable scanning when the key counter is removed during scan
operations.
z
The factory default is [Not valid] (scanning is possible whether or not the key counter is present).
1
Select [SCAN W/O key count] in [Initial setting] screen.
When you touch the [
] or [
] key, the selection item is switched.
z
For details on the procedure for displaying the [Initial setting] screen, refer to [Switching the Key Operator Mode]
(
2
Touch the [EDIT] key, then change the setting.
Each time you touch the [EDIT] key, the setting is switched.
If you select [Valid], operation is according to the copier setting.
If you select [Not valid], scanning is possible whether or not the key counter is present.
z
For the copier settings to use when [Valid] is selected, contact one of our service outlets.
3
Touch the [RETURN] key.
From now on, the copier operates in accordance with this setting.