Creating a spool directory, Creating a spool directory -16 – Kodak 8660 User Manual

Page 82

Text mode
Original mode

Configuring for TCP/IP

7-16

Part No. 6B4389 June 1999

Creating a Spool Directory

If you have not already created a spool directory, you need to do
so now. If you are using HP/UX, AIX, Solaris 2.xx, and some
other systems, a spool directory has already been created. The
lpd spool directory is located in the /usr/spool directory. Check
with your system manager to see if the location is different for
your system.

Use the mkdir command to create a spool directory. For example,
to create a spool directory for the queue kodak1, you would enter:

mkdir /usr/spool/lpd/kodak1

NOTE: It is also necessary to start the daemon on some systems.

Use the lpc start command on the Berkeley-compatible
Unix systems. For example:

lpc start kodak1Adding an IP Address

This manual is related to the following products:

8670