Kodak 8660 - Manual (Page 62)

Novell NetWare
6-4 Part No. 6B4389 June 1999
Configuring for NDS Using NWAdmin
Refer to your NWAdmin documentation for specific details on
using NWAdmin.
Make sure that you are logged in as Admin in NDS mode on the
NetWare 4.xx file server.
To configure the NIC using NWAdmin:
1. Select the desired organizational unit that will contain the
new printer.
2. Create/Add a new printer object with the name of the printer
(NIC).
3. Select the desired container object (organizational unit) that
will contain the default print queue.
4. Create a new print queue.
5. Select the print queue and assign the print queue to the
printer you created.
6. Exit NWAdmin.
Configuring for NDS Using JetAdmin or XAdmin
Refer to your JetAdmin documentation for specific details on the
use of JetAdmin.
NOTE: The same service cannot be used for both queue server
mode and remote printer mode. If you wish to enable
remote printer capabilities or services other than the
default NetWare services, you must define the new
services that are enabled for NetWare and for the desired
port.
1. Double-click on the icon for JetAdmin or XAdmin. Select the
name of the NIC from the list
NOTE: The default name of the NIC is KOD_xxxxxx.
2. From JetAdmin or Xadmin, select the remote printer as the
operating mode. Select the name of your printer/NIC as the
print server name, and select the number of the printer you
made a note of as the printer number.
3. Select the desired default printer driver.