beautypg.com

Netware commands – Kodak 8660 User Manual

Page 103

background image

Appendix B Command Summary

Part No. 6B4389

June 1999

B-5

Sets procedure used by the NIC when obtaining its IP address.
By default the IP address is set along with a default subnet mask
and a router address that is the same as the address of the load
host. By setting nn to 1, the subnet mask is not set. If nn is set to
2, the router address is not set. If nn is set to 3, neither the subnet
mask nor the router address is set.

SET IP ROuter aa.bb.cc.dd
Sets default router address.

SET IP SUbnet aa.bb.cc.dd
Sets subnet mask.

SET IP Timeout n
Sets inactivity timeout (min).

SET SERVice IP [ENDIS]
Enables or disables TCP/IP jobs on specified service.

SET SERVICE TCP

nn

Sets TCP port number (>1023) on service.

SHow IP
Shows LPD/TCP/TELNET Parameters

SHow IP ACcess
Shows IP addresses that are allowed to access print server.

NetWare Commands

CLear NEtware SErver

server

Removes specified NetWare file server from PontPrint server
access list.

SET NEtware ADvertise n
Sets advertising frequency of the NIC.

SET NEtware [ENIDIS]
Enables or disables NetWare protocol of the NIC.

SET NEtware FRame [802.2, 802.3, ETH, AL, AU, SNA].

This manual is related to the following products: