Kodak 8660 - Manual (Page 42)

Using Configuration Utilities
3-18 Part No. 6B4389 June 1999
The following options are available from the Ports menu:
1
This test print is for NIC configuration parameters. Exit Setup before the test print can be generated.Do
not confuse this test print with the test print generated by pressing Print on the front display.
2 Resets the NIC for parameter changes.
Ports> Network
IPX FrameTypes 802.3
802.2
SNAP
Ethernet II
Auto (Default)
TCP/IP Status IP Address
Router Addr
Subnet Mask
Address IP Address
Router Addr
Subnet Mask
Type Static
BootP
RARP
DHCP
Auto (Default)
# of Tries 3 (Default)
EtherTalk Version 2
Test Print
1 NIC Config Parameters
Reset
2 (NIC Only)