Kodak 8660 - Manual (Page 22)

Installing the Hardware
2-6 Part No. 6B4389June 1999Au-
8. Hold the card so that the printer connectors are on the bottom
and the network cable receptacle is toward you.
9. Hold the card so that the network cable receptacle is toward
the slot cover. Tilt the card slightly, and slide the face plate
connector against the NIC slot.
10. Position the printer interface connectors against the
receptacles to seat the NIC. Press the NIC gently into place.
11. Secure the NIC faceplate to the printer by replacing the screws
you removed.
12. Grasp the handles on the back of the printer, and slide the back
of the printer in.
13. Replace the back panel screws you removed.