Kodak 8660 - Manual (Page 100)

Appendix B Command Summary
B-2 Part No. 6B4389 June 1999
Resets the NIC
SET DEFAULT
Sets the NIC’s parameters to factory defaults
SET LOAD Disable
Disables firmware reload after exit
SET LOAD ENable
Enables firmware reload after exit
SET LOAD HOst
Sets node name of boot host for (NetWare firmware load)
SET LOAD IP aa.bb.cc.dd
Sets IP address of load host (TCP/IP firmware load)
SET LOAD SOfware < filename>
Sets host filename of firmware to load
SET PAssord
Sets console password (default password is ACCESS)
SET PORT P1 BIDIR [ENIDIS]
Enable/disable bidirectional mode on print server
SET PROtect
Set console protection password to prevent access to SET
commands (use UNPROTECT command to access SET
commands)
SET SERVEr DEscription
Sets node description string displayed with SHOW SERVER
command
SET SERVEr STRing n “...”
Defines server BOT/EOT string. Refer to Appendix B.
SET SERVice [ENIDIS]
Enable or disables specified protocol on the specified service.
SET SERVice BOT nn