Kodak 8660 - Manual (Page 25)

Part No. 6B4389 June 1999 3-1
3 Using Configuration Utilities
You can use various utilities to configure the Kodak Professional
10/100 network interface card (NIC):
Web Browser Configuration Tool —Graphical interface;
configure from any platform that supports Web access; requires
an IP address. No additional configuration software necessary.
XAdmin Configuration Utility — Graphical interface; use for
Windows only; software provided with the NIC. Does not provide
AppleTalk configuration.
Apple LaserWriter Utilities —Graphical interface; Macintosh
only; software provided with the Macintosh operating system or is
available on Apple’s Web site; functionality limited to AppleTalk
parameters and downloading a PostScript file.
XConfig Utility —Command line interface; Windows only;
software provided with the NIC. Does not provide AppleTalk
configuration. Refer to Appendix B for more information on the
NIC configuration commands.
Telnet— Command line interface; configure from any platform
that supports the use of Telnet (TCP/IP); requires an IP address.
Refer to Appendix B for more information on the NIC
configuration commands
NIC Serial Port— Command line interface; configure from any
serial terminal. Refer to Appendix B for more information on the
NIC configuration commands
Printer Front Control Pane l—Describes NIC configuration
parameters such as IP address that can be established from the
printer’s control panel.
Additional Mechanisms for Establishing an IP Address —
Describes use of ARP, RARP and BOOTP.
NIC Services —Services and names are summarized in
Appendix B.
NIC Commands —Commands for command line configuration
utilities are summarized in the Appendix B.