Configuring for nds using pconsole and xconfig, Pconsole, Configuring for nds using pconsole and xconfig -5 – Kodak 8660 User Manual
Page 63: Pconsole -5, Tcp/ip troubleshooting -3
Novell NetWare
Part No. 6B4389
June 1999
6-5
4.
Exit Jet Admin or XAdmin.
5.
Reload the PSERVER NLM from the NetWare file server
console.
Configuring for NDS Using PCONSOLE and
XConfig
The following steps describe how to use PCONSOLE and
XConfig to configure the NIC for remote printer operation.
PCONSOLE
1.
Make sure that the PSERVER NetWare Loadable Module
(NLM) is loaded on your file server.
2.
Log in as supervisor (Netware 3.xx) or as admin (NetWare
4.xx).
NOTE: If you want NDS support, do not log in under bindery
mode.
3.
Run the PCONSOLE utility from your PC workstation.
4.
Create a new print queue. Enter a volume name, if
necessary.
5.
Select Print Servers from the PCONSOLE menu and then
select the name of the printer/NIC.
6.
Enter the printer name from the Object and Class menus.
7.
Select the printer’s name, and make a note of the printer
number assigned by PCONSOLE.
8.
Select the print queue, and assign it to the remote printer.
9.
Exit PCONSOLE.