Kodak 8660 - Manual (Page 102)

Appendix B Command Summary
B-4 Part No. 6B4389 June 1999
Shows server and LAT parameters
SHow SERVEr COunters
Shows server statistics
SHow SERVice
Shows service Parameters
SHow TEstpage
Prints test page
SHow VErsion
Shows server firmware version
UNPROtest
Allows system manager to temporarily access SET commands
when the remote console is in protected mode. Refer to SET
PROTECTION command. The SET DEFAULT command can be
used to permanently disable the protected mode.
ZEro
Zeroes statistical counts.
TCP/IP Commands
SET IP ACcess [ENIDIIALL] aa.bb.cc.dd {MAsk ee.ff.gg.hh}
Allows or prevents specified IP address from accessing the NIC.
SET IP ADdress aa.bb.cc.dd
Sets IP address of print server.
SET IP BOot n
Number of BOOTP/RARP tries.
SET IP ENable/DISable
Enables or Disables IP Processing
SET IP RArp nn