Overview of installing and configuring the n ic, Overview of installing and configuring the n ic -3 – Kodak 8660 User Manual

Page 13

Introduction

Part No. 6B4389

June 1999

1-3

Overview of Installing and Configuring the N IC

To install and configure the NIC:

Step 6: Install the printing software.

Use server
print queues?

Yes

Step 5: Configure server (Novell, Windows NT)

Step 4: Configure the NIC if the default settings are unacceptable.
Use a Web-based interface, Telnet, Or the XAdmin utility.
Recommendation: Use the defaults until you can demonstrate successful
network printing. (TCP/IP minimally requires an appropriate IP address
that can be entered from the printer’s front control panel.)

Yes

Step 3: Install the NIC in the printer.
Requires Phillips or T10 torque
screwdriver and static strap.

Step 2: Gather necessary hardware and software components:
printing software (included on the CD that came with the printer)

NIC, and utilities diskette

Step 1: Determine your network and printing environment.
NIC supports TCP/IP, Novell Netware, AppleTalk, and NetBEUI protocols.

Is the NIC installed in the
printer?

This manual is related to the following products:

8670