Kodak DCS500 - Manual (Page 80)

6-4
4 While the custom function
number is displayed, press the
CF button to change the setting.
The number changes each time
the Custom Function button is
pressed.
Dots are displayed below the
exposure scale to indicate
optional custom function
settings that have been selected.
☛
A dot below “–2” indicates
that an optional setting for
custom function F-4 has been
selected. Dots for other
custom functions appear to the
right or left of the “–2”
position.
☛
You can check the custom
function settings at any time
by pressing the CF button to
activate the Top LCD panel.
5 Press the Shutter button halfway
to complete the setting and
restore the Top LCD panel to the
original display.
3 2 1 1 2 3 0
✔
Display example indicating that custom
functions 5, 10, and 14 are set.