Setting powersave time, Determining total actuations, Use folder 1 – Kodak DCS500 User Manual
Page 101: Setting powersave time -25, Determining total actuations -25
6-25
6
C
onf
iguring
Setting Powersave Time
You can change the PowerSave time using the same procedure described for changing
Display Off time. Refer to “PowerSave Mode” on page 3-10.
Determining Total Actuations
You can determine the number of images captured by your camera from the time of its
manufacture.
Use Folder 1
You can specify whether the default place to store images is an empty folder or folder 1
when you insert a new PC Card.
With the Properties menu displayed,
select Total Actuations.
The Total Actuations screen
appears, informing you of the
number of images captured.
1
With the Properties menu
displayed, select Use
FOLDER01.
This Use Folder 1 screen
appears.
2
Highlight Yes or No.
If you select Yes, every time you
replace your PC Card, images
will be stored in folder 1.
If you select No, every time you
replace your PC Card, images
will be stored in the first empty
folder found on the PC Card.