Kodak DCS500 - Manual (Page 40)

2-18
Attaching the Lens
1 Remove the lens rear dust cap
and the camera’s body cap by
turning them counterclockwise.
2 Align the red dots on the lens
and camera body, then rotate the
lens clockwise until it locks in
place with a click.
3 Set the lens Focus Mode switch
to (AF).
☛
Autofocus is not possible
when the switch is set to (M).
☛
During autofocusing, do not
touch the rotating part of the
lens.
☛
Some Canon lenses are
manual focus only.
AF M
8 0
m m
1: 1
4
AF
M
22 22
50mm
AF
M