Kodak DCS500 - Manual (Page 50)

3-4
4 To insert: slide the battery to the
back of the battery slot and press
firmly in place.
To remove: slide the battery out
of the battery slot.
5 Close the Battery/PC Card door.
☛
You can insert or remove a
battery while the camera is
connected to the AC adapter.
IMPORTANT:
Be sure that the red warning
light is off before continuing.
IMPORTANT:
The battery can be inserted
incorrectly, but it will not fully
seat into the camera. Do not
force the battery into the
camera. Insert the end with the
slots, pointed down, and press
lightly to seat the battery
contacts.