Fine spot metering, Fine spot metering -33 – Kodak DCS500 User Manual
Page 152
8-33
8
Expos
ure
Fine Spot Metering
☛
In One-shot AF mode, the exposure setting is locked during Continuous Shooting
mode, but the AE lock indicator does not light in the viewfinder.
Fine Spot metering ( ) limits the
metering area to the center of the
viewfinder as defined by the Fine
Spot metering mark (approximately
6% of the image area for the DCS
520 and 4% for the DCS 560). Use
this mode when you need an
accurate exposure reading of a
specific subject area.
In continuous shooting mode (
)
or high-speed continuous shooting
mode with the Power Drive Booster
E1 (
), exposure value
determined for the first frame is also
used for the second and consecutive
exposures.
This function lets you select Fine
Spot metering linked to the focusing
points. Metering is limited to the
area of the manually selected
focusing point, (approximately 9%
of the viewfinder image area for the
DCS 520 and 6% for the DCS 560).
DCS 520
M
DCS 560
M
L
H
Custom Function F-13