Kodak DCS500 - Manual (Page 143)

8-24
Using Automatic Focusing Point Selection Mode
In automatic focusing point selection mode, use the center focusing point to designate the
near and far focus points. Otherwise, the basic procedure is the same as for manual
Focusing Point Selection mode.
9 Compose the picture and press
the Shutter button halfway to set
the aperture and focus for the
designated depth of field.
The correct aperture value for
the designated depth of field and
the corresponding shutter speed
are displayed in both the
viewfinder and Top LCD panel.
If you remove your finger from
the Shutter button, the display
changes to “dEP” and the
aperture value.
☛
The exposure is determined
immediately before the shutter
is released.
10 Press the Shutter button
completely to capture the image.