Kodak DCS500 - Manual (Page 161)

8-42
3 When you press the Shutter
button halfway and then remove
your finger, the bracketing
amount is displayed by the
viewfinder’s Exposure Level
indicator.
4 Capture images according to the
current drive mode.
The compensated exposure
value for each shot appears in
the Top LCD panel as the three
frames are exposed, and the
AEB indicator (✳) blinks
continuously until all three
exposures are completed.
The compensation amount for
each shot also appears in the
viewfinder by the Exposure
Level indicator.
It is possible to take one shot at a
time even in Continuous
Shooting mode. The AEB
indicator (✳) blinks
continuously until all three
exposures are completed.
☛
If the Shutter button
completely pressed in
continuous exposure mode,
three frames are exposed in
sequence but the viewfinder’s
metering level indicator is not
active.
☛
To capture the three frames,
set Drive mode to Continuous,
and hold the Shutter release
until three images are
captured.