Forwarding calls, Changing active call forwarding – Siemens 70isdn User Manual

Page 78

Forwarding calls

kap10.fm5

Profiset 70isdn, GB: A30853-X300-B501-3-7619

20.5.99

Programming and activating call forwarding for other devices

If other devices that cannot program call forwarding, e.g.

fax or answering machine, are operated on the same S

bus, you can program call forwarding for "all services" for

the bus’s call number (MSN).

Prerequisite: the "Forwarding" menu item is activated

(➔ page 26).

Changing active call forwarding

Prerequisite: call forwarding is active.

Prerequisite: The "Forwarding" menu item is activated

(➔ page 26).

You cannot change an MSN if forwarding is ac-

tive for it (see ➔ page 18).

Details about programmed forwarding can be

queried at any time by selecting the entry "Sta-

tus" in the service menu.

and

Select "Forwarding?" and confirm.

and

Select "4=others?" and confirm.

The directory number for "others?" is preset with the last

number.

The number can be deleted by backspacing with

and

edited with

Confirm.

and

Select the forwarding mode "immediately", "deferred" or

"if busy" and confirm.

The last call forwarding number is prompted.

The number can be deleted by backspacing with

and

edited with

Confirm.

Call forwarding is active for all calls under MSN 4.

The call number "4=other?" must differ from the

call numbers used for MSN1 to MSN3 that you

set in Profiset 70isdn (➔ page 18).

Confirm "Forwarding?".

and

Select the number for which forwarding is to be changed

(=on). Forwarding is active for this number.

and

Select "Destination new/change?" and confirm.