Siemens 70isdn - Manual (Page 42)

Programming telephone settings
30
kap05.fm5 Profiset 70isdn, GB: A30853-X300-B501-3-7619 20.5.99
Deactivating and reactivating lockout numbers
You can deactivate and re-activate programmed lockout
numbers at any time.
Activating/deactivating collective lockout
By deactivating the collective lockout feature, you can de-
activate all activated lockout numbers in one go. All direc-
tory numbers can then be dialed once more. All lockout
numbers are re-activated when you activate collective
lockout.
If you enter new lockout numbers when collective lockout
is switched off, the feature is automatically switched on.
The new lockout numbers are thus activated. The "old"
lockout numbers remain deactivated and must be activat-
ed one by one when needed.
<>
and ? Select "Change".
o Enter the required range of numbers (e.g. "00"). You can
enter up to five digits. Backspace to delete with
<
. To
delete the entire lockout number, press < until no more
digits are displayed.
? Save the setting. The lock is automatically activated.
> Service? ? > 6=barring functions? ?
o and ? With password protection (➔ page 16): enter the pass-
word.
<>
and ? Select "Change" and observe the upper display line.
? If "locked" is displayed, deactivate the lockout number.
If "unlocked" is displayed, activate the lockout number.
or to
>
> 03=lockout number 1?
11=lockout number 9?
lockout number 2, 3, etc.
?
?
> Service? ? > 6=barring functions? ?
o and ? With password protection (➔ page 16): enter the pass-
word.
The upper display line indicates whether collective lock-
out is activated or deactivated.
> 14=collective lockout? ?