Siemens 70isdn - Manual (Page 100)

Answering machine
88
kap12.fm5 Profiset 70isdn, GB: A30853-X300-B501-3-7619 20.5.99
Activating/deactivating the VIP function
Time control
The time control function allows you to program answer-
ing machine operation depending on the time of day.
For example, you can program your answering machine to
come on between 12.00 p.m. and 8.00 a.m. and to an-
swer calls with a particular announcement. You can pro-
gram your answering machine to go off between 8.00
a.m. and 8.00 p.m. The answering machine should then
reactivate itself for the remaining evening hours and an-
swer calls with a different message to the one used dur-
ing the morning hours.
Two time controls are available. This allows you to pro-
gram different time controls for different MSN numbers.
Up to 5 time windows can be specified for each time con-
trol, e.g. from 12.00 p.m. to 6.00 a.m., from 6.00 a.m. to
12.00 a.m., from 12.00 a.m. to 4.00 p.m., from 4.00 p.m.
to 8.00 p.m. and from 8.00 p.m. to 12.00 p.m.
The system automatically jumps to the program menu
item the first time the answering machine is activated if
time controls have not yet been set.
To program the two time controls, an announcement or
an info announcement must have been recorded.
Programming a time control
> 7=VIP function? ? > Program? ?
o and ?
Enter and confirm the VIP password.
The password is programmed.
Activate the answering machine menu.
<>
o and ? With password protection (➔ page 16): enter the pass-
word.
AM menu
5=settings? ?
> 7=VIP function? ? > switch over? ?
Activate the answering machine menu.
<>
AM menu
5=settings? ?