Siemens 70isdn - Manual (Page 32)

Programming telephone settings
20
kap05.fm5 Profiset 70isdn, GB: A30853-X300-B501-3-7619 20.5.99
Date/time
The date and time are preset with zeros by default. The
correct date and time are set automatically by the switch-
ing centre the first time an outgoing call is set up. If your
network provider does not support this service, you can
program the date and time yourself. Your input is checked
for plausibility.
Display contrast
You can adapt the display contrast to suit your lighting
conditions. In this case, the Profiset must be idle.
Loudspeaker volume
You can set the volume of the loudspeaker to eight levels.
The volume is preset to level 5.
> Service? ? > 2=configuration? ?
o and ? With password protection (➔ page 16): enter the pass-
word.
<> Select the date format.
? Save the date format.
o Enter the date.
? Save the date.
o Enter the time.
? Save the time.
> 03=date/time? ?
-
or
+
Define the setting.
> Service? ? > 5=audio? ? > 1=loudspeaker? ?
o or
-+
or
<>
Enter a value between 1 and 8 or select:
1 means minimum volume, 8 means maximum volume.
? Save the setting.