Programming telephone settings, Activating/deactivating room monitoring, Locks – Siemens 70isdn User Manual
Page 39
Programming telephone settings
27
kap05.fm5
Profiset 70isdn, GB: A30853-X300-B501-3-7619
20.5.99
Activating/deactivating room monitoring
This function allows you to use another telephone to
acoustically monitor the room in which your telephone is
located (see ➔ page 93).
Locks
You can lock your Profiset 70isdn against unauthorised
use:
●
Direct station selection (babyphone)
only allows
you to dial a preset DSS number (procedure ➔ page
59).
●
Total lock
only allows you to dial two programmed
emergency numbers (procedure ➔ page 60).
●
Dial restriction with lockout numbers.
You can lock up to 9 different number ranges. This
means you cannot dial any number that begins with a
numbering sequence included in the lockout list (e.g.
international numbers, service numbers, etc. – proce-
dure ➔ page 59).
You can also program a Barring functions feature key
(➔ page 42). You can program this key to activate/deacti-
vate the total lock or to activate/deactivate a lockout
number.
Programming direct station selection (babyphone)
The direct station selection number can be dialed if the
telephone is locked with direct station selection.
>
Service?
? >
2=configuration?
?
o
and
?
With password protection (➔ page 16): enter the pass-
word.
The upper display line indicates whether room monitoring
is switched on or off.
<>
Select "switch over?".
?
Save the setting. If room monitoring was previously deac-
tivated, it is now switched on. If it was activated, it is now
switched off.
>
19=room monitoring?
?
>
Service?
? >
6=barring functions?
?