beautypg.com

Siemens 70isdn User Manual

Page 63

background image

Outgoing and incoming calls

51

kap08.fm5

Profiset 70isdn, GB: A30853-X300-B501-3-7619

20.5.99

Deactivating the call signal

If you do not wish to be disturbed by incoming calls, you

can deactivate the tone ringing. In this case, you must

have programmed a key with the "Call signal off" function

(➔ page 42). To signal an incoming call, the "Call signal off"

key LED flashes.

Automatic call acceptance

You can set your Profiset 70isdn to accept calls automat-

ically. In this case, you must have programmed a key with

the "Automatic call acceptance" function (➔ page 42).

When this function is activated, the "Automatic call ac-

ceptance" key LED is illuminated. Calls are switched di-

rectly to the loudspeaker after a ring tone. Queued callers

are not switched through automatically.

Call list

If a caller does not reach you or if a caller, a queued caller

or a callback call is rejected, the relevant directory number

is stored in the call list.

Up to 20 different directory numbers are stored, as is the

number of retries (max. 99). The most recent entry is dis-

played first.

If a new entry is recorded in the list, the LED of the "Call

list" key flashes to prompt you to view the list. A "Call list"

key therefore only exists if it was programmed as a fea-

ture key (see ➔ page 41). After the list has been viewed,

the LED lights constantly until you have cleared the list

again by deleting all numbers.

To activate the function, press the "Call signal off" func-

tion; LED lights up.

Calls are then signalled by the flashing LED only.

To deactivate the function, press the "Call signal off" key

again; LED goes out.

All calls are then signalled by tone ringing again.

Call signal off

Call signal off

To activate the function, press the "Automatic call accept-

ance" key; LED lights up.

Calls are automatically switched to the loudspeaker. The

microphone remains switched off!

To deactivate the function, press the "Automatic call ac-

ceptance" key again. LED goes out.

Calls are then accepted in the usual manner.

Autom. call accept.

Autom. call accept.