Answering machine, Setting the number of rings, Setting the voice quality – Siemens 70isdn User Manual

Page 102

Answering machine

kap12.fm5

Profiset 70isdn, GB: A30853-X300-B501-3-7619

20.5.99

Setting the number of rings

You can set the number of times the telephone should

ring before the call is answered by the answering ma-

chine.

Setting the voice quality

You can switch between two different voice qualities

when recording an announcement:

●

Normal voice quality (compressed)

●

High voice quality (uncompressed – higher memory

requirement).

and

Select MSN number.

and

Select the required time controls:

5 = time control 1, 6 = time control 2.

You can see whether the time control is active or not on

the upper display line.

"switch over?" appears on the display. Confirm this dis-

play. If the time control was previously deactivated, it is

now activated. If is was activated, it is now deactivated.

Activate the answering machine menu.

and

With password protection (➔ page 16): enter the pass-

word.

The number of rings set is shown in the upper display

line.

and

Select the desired number of rings (1, 2, 4 or 6) or "Auto

2/4". The default setting is 4 rings.
If you select "Auto 2/4", the number of rings depends on

whether new messages are stored. If new messages are

received, the answering machine answers the call after

two rings, otherwise it waits for four rings. This setting is

particularly useful if you are checking your answering ma-

chine remotely as the number of rings indicates whether

there are new messages or not. You thus have the option

of hanging up after two rings without incurring any charg-

es (➔ page 92).

AM menu

5=settings?

2=number of calls?

Activate the answering machine menu.

AM menu