Siemens 70isdn - Manual (Page 43)

Programming telephone settings
31
kap05.fm5 Profiset 70isdn, GB: A30853-X300-B501-3-7619 20.5.99
Checking the settings (status)
You can check the principal settings for your Profiset
70isdn at any time.
Important settings are displayed for several seconds at a
time. Observe the display.
Clearing memory
You can clear any or all of the following memories:
● Individual meter (summation meter)
● Locks
● Destination dialing
● Telephone directory
The "Clear memory" command can be used to delete the
following settings and memories in one go:
● Redial key, call list, telephone directory, destination di-
aling key , summation meter, emergency numbers 1
and 2, lockout numbers, direct station selection and
total lock.
<> Select "switch over?".
? Save the setting. If the collective lock was previously de-
activated, it is now activated. If it was previously activat-
ed, it is now deactivated.
> Service? ? > 1=status? ?
If you use this feature frequently, you can pro-
gram a "Status" function key (➔ page 42).
> Service? ? > 3=local functions? ?
4 Press key "4".
o and ? With password protection (➔ page 16): enter the pass-
word.
<>
and ? Select the memory you want to clear.
The "clear memory?" selection deletes all the above-men-
tioned settings and memories.
<> Select "Clear?" (this additional query is output to prevent
inadvertent deletion).
? Confirm. The memory is cleared.