Siemens 70isdn User Manual

Page 61

Outgoing and incoming calls

kap08.fm5

Profiset 70isdn, GB: A30853-X300-B501-3-7619

20.5.99

Forwarding a call

Rejecting a call

Rejecting all calls (do not disturb)

You can temporarily reject calls to your Profiset 70isdn

while you nonetheless continue to make calls. In this

case, you must have programmed a key with the "Do not

disturb" function (➔ page 42). The setting is active for as

long as the associated LED is lit.

Call waiting

You must apply to your local network provider for the "Call

waiting" feature. The "Call waiting permitted" function

must be activated on your Profiset 70isdn (➔ page 26).

While you are conducting a call, a second incoming call is

signalled acoustically and visually. You can then accept,

reject, ignore, or forward this call without disconnecting

the first caller.

Call waiting is not possible during a conference or consul-

tation call. In this case, the caller is rejected.

and

Select "Forward call?" and confirm or press the

"Forward call"; LED flashes.

In this case, you must have programmed a key with the

"forward call" features (➔ page 42).

The directory number of the last call forwarding task is

displayed.

The directory number can be deleted by pressing the

backspace key

and re-entered with

Confirm; the LED of the "Forward call" key goes out.

The caller was forwarded to the selected number.

Forward call

and

Select "Reject call?" and confirm.

The caller receives a corresponding message from the

switching system.
The directory number, if known, is transferred to the call

list.

To activate the function, press the "Do not disturb" key;

LED lights up.

All calls are then rejected. If the "Info text" function is ac-

tivated (➔ page 25), a predefined info text will appear in

the caller’s display (if available).

To deactivate the function, press the "Do not disturb" key

again. LED goes out.

All calls are then signalled again.

Do not disturb