Programming telephone settings, Activating/deactivating the individual meter – Siemens 70isdn User Manual
Page 35
Programming telephone settings
23
kap05.fm5
Profiset 70isdn, GB: A30853-X300-B501-3-7619
20.5.99
Activating/deactivating the individual meter
If the individual meter is activated, the accrued charges
are indicated for approx. 3.5 seconds in the telephone dis-
play following each call you make which is liable for charg-
es.
Activating/deactivating the summation meter for charges
If the summation meter is switched on, the sum of all
charges accrued thus far is indicated for approx. 3.5 sec-
onds in the display following each toll call made.
>
Service?
? >
3=local functions?
? >
1=charges?
?
o
and
?
With password protection (➔ page 16): enter the pass-
word.
The upper display line indicates whether the individual
meter is switched on or off.
<>
Select "switch over?".
?
Save the setting. If the individual meter was previously
deactivated, it is now switched on. If it was activated, it
is now switched off.
>
1=charge meter?
?
>
Service?
? >
3=local functions?
? >
1=charges?
?
o
and
?
With password protection (➔ page 16): enter the pass-
word.
The upper display line indicates whether the summation
meter is switched on or off.
<>
Select "switch over?".
?
Save the setting. If the summation meter was previously
deactivated, it is now switched on. If it was activated, it
is now switched off.
>
2=summation meter?
?
There may be differences between the device’s
meter and the individual meter of the switching
centre. The individual meter of the network op-
erator is definitive for the telephone bill.