Siemens 70isdn - Manual (Page 44)

Programming telephone settings
32
kap05.fm5 Profiset 70isdn, GB: A30853-X300-B501-3-7619 20.5.99
Restoring the as-supplied condition
The Profiset 70isdn can be reset to the factory default set-
tings.
National access code
The national access code (code for connections to other
local networks) is required for the comparison of the re-
corded directory numbers received via CLIP/COLP. For an
explanation of the abbreviations CLIP and COLP, see the
ISDN glossary (➔ page 94).
The factory default is 0.
You can only change this value if the network operator has
a new or a different access code.
It may take several seconds to clear the memo-
ry. The display remains frozen during this time.
> Service? ? > 3=local functions? ?
4 Press "4".
o and ? With password protection (➔ page 16): enter the pass-
word.
<> Select "Set?" (this additional query is output to prevent in-
advertent deletion of individual settings).
? Confirm. The as-supplied condition is restored.
> 6=as-suppl. condition? ?
It may take several seconds to restore the as-
supplied condition. The display remains frozen
during this time.
> Service? ? > 2=configuration? ?
o and ? With password protection (➔ page 16): enter the pass-
word.
o Enter the national access code (max. 4 digits). Backspace
to delete with
<
.
? Save the setting.
> 16=nat. access code? ?