Answering machine, Operating the answering machine remotely – Siemens 70isdn User Manual
Page 104
Answering machine
92
kap12.fm5
Profiset 70isdn, GB: A30853-X300-B501-3-7619
20.5.99
Operating the answering machine remotely
You can operate your answering machine remotely from a
normal telephone. To do this, the normal telephone must
be set to DTMF signalling or you must have a hand-held
transmitter. The following functions can be performed re-
motely:
●
Check recordings
●
Delete recordings
●
Perform room monitoring
●
Activate/deactivate the answering machine
Initiating remote operation
Checking messages and infos
To check recordings, use the same keys as for checking
recordings on your own telephone.
Deleting recordings
To delete recordings, use the same keys as for deleting re-
cordings on your own telephone.
If you have set "Auto 2/4" for the number of rings
(➔ page 90), more than 2 rings indicates that
there are no new messages.
o
Call your number from a normal telephone.
g
Wait until the announcement starts.
#
o
#
Enter the four-digit PIN (preceded and followed by a
pound symbol) while the announcement is playing, e.g.
#1234#
.
The connection is cleared down after the third
incorrect PIN entry.
2
Plays back a recording.
Press
2
once more to stop the playback.
9
Plays back a recording faster.
1
Rewinds to the start of the recording or to the previous
recording.
3
Forwards to the next recording.
5
Stops the playback.
4
Deletes all recordings that have been played back. An an-
nouncement confirms the delete operation.