Siemens 70isdn - Manual (Page 38)

Programming telephone settings
26
kap05.fm5 Profiset 70isdn, GB: A30853-X300-B501-3-7619 20.5.99
Enabling/disabling call waiting
You can set whether or not incoming calls are to be sig-
nalled during a call. You must apply to your local network
provider for this feature. Inquire about the respective
charges.
Activating/deactivating the "forwarding" menu item
You can set whether or not the "forwarding" option ap-
pears in the main menu of your Profiset 70isdn. You must
apply to your local network provider for the call forwarding
feature. Inquire about the respective charges. For informa-
tion on programming and activating call forwarding ,see
➔
page 65.
> Service? ? > 2=configuration? ?
o
and ? With password protection (➔ page 16): enter the pass-
word.
The upper display line indicates whether you have ena-
bled or disabled call waiting.
<> Select "switch over?".
? Save the setting. If call waiting was previously disabled, it
is now enabled. If it was enabled, it is now disabled.
> 14=call waiting? ?
> Service? ? > 2=configuration? ?
o
and ? With password protection (➔ page 16): enter the pass-
word.
The upper display line indicates whether you have activat-
ed or deactivated the display of the "forwarding" menu
item.
<> Select "switch over?".
? Save the setting. If the setting was previously deactivat-
ed, it is now activated. If it was activated, it is now deac-
tivated.
> 07=ring transfer? ?