Uso de la videocámara: grabación avanzada, Using the camcorder - advanced recording – Samsung CAMCORDER User Manual
Page 60

ENGLISH
ESPAÑOL
Using the CAMCORDER - Advanced Recording
Uso de la videocámara: Grabación avanzada
59
59
●
EIS (Electronic Image Stabilizer)
✤
The EIS function works in CAMCORDER mode only.
✤
EIS (Electronic Image Stabilizer) is a function that compen-
sates for any shaking or hand movement while holding the
camcorder (within reasonable limits).
✤
It provides more stable pictures when:
■
Recording with the zoom
■
Recording a small object close-up
■
Recording and walking at the same time
■
Recording through the window of a vehicle
1. Set the device to CAMCORDER and set the power
switch to REC mode.
2. Press the MENU button.
■
The menu list will appear.
3. Turn the MENU DIAL highlight to CAMCORDER
and press the MENU DIAL.
■
The sub-menu list will appear.
4. Select RECORD SET from the sub-menu and
press the MENU DIAL.
5. Turn the MENU DIAL to activate the EIS function,
then press the MENU DIAL.
■
The EIS menu is changed to ON.
■
If you do not want to use the EIS function, set
the EIS menu to OFF.
6. To exit, press the MENU button.
Note
■
It is recommended that you deactivate the shake
compensation function when using a tripod.
●
EIS (Estabilizador electrónico de la imagen)
✤
La función EIS sólo está operativa en la modalidad CAM-
CORDER.
✤
EIS (Estabilizador electrónico de la imagen) es una función
que compensa las sacudidas o los movimientos de la mano al
sostener la videocámara, dentro de unos límites razonables.
✤
Proporciona imágenes más estables cuando:
■
Se graba con el zoom
■
Se graba un objeto pequeño muy de cerca
■
Se graba mientras se camina
■
Se graba a través de la ventanilla de un vehículo
1. Ajuste el dispositivo en CAMCORDER y el
interruptor de encendido en la modalidad REC.
2. Pulse el botón MENÚ.
■
Aparece la lista del menú.
3. Gire el DIAL MENÚ hasta resaltar CAMCORDER
y pulse el DIAL MENÚ.
■
Aparece la lista del submenú.
4. Seleccione RECORD SET en el submenú y
pulse el DIAL MENÚ.
5. Gire el DIAL MENÚ para activar la función EIS y
pulse el DIAL MENÚ.
■
El menú EIS se sitúa en la posición ON.
■
Si no desea utilizar la función EIS, ajústela
en OFF en el menú.
6. Para salir, pulse el botón MENÚ.
Nota
■
Se recomienda desactivar esta función cuando
se emplee un trípode.
CAMCORDER REC MODE
INITIAL
RECORD SET
PLAY SET
CAMCORDER
CAMERA
MEMORY
VIEWER
CAMCORDER REC MODE
CAMCORDER SET
RECORD SET
PLAY SET
CAMCORDER REC MODE
CAMCORDER SET
RECORD SET
REC SELECT
REC MODE
EIS
D. ZOOM
PROGRAM AE
WHT. BALANCE
TAPE
SP
00655D SCD5000 USA+ESP(034~069) 6/19/03 5:10 PM Page 59