Symbol Technologies SPT 1700 User Manual
Page 67
2-17
Network Setup
You can select any of the buttons, or triggers, and modify their settings. Note that none of
your changes will become active until you tap the Save button. When Save is selected, you
are provided with the Disconnecting and Reconnecting screens, indicating that the settings
are being saved and the modem is being reset with the new settings. The Save button also
returns you to the Quick Status screen.
IP Address
This is the current IP address of the modem. Tap to enter
a new IP address.
Primary DNS
This is the current Primary DNS address of the modem.
Tap to enter a new DNS address.
Secondary DNS
This is the current Secondary DNS address of the modem.
Tap to enter a new DNS address.
Sleep Mode
Allows or disallows the modem to enter the low-power
mode. Please note that this feature is only functional when
used on Wireless IP networks that support it.
Network Provider
Configure the side preferences for the modem. All CDPD
systems are categorized into "A" systems or "B" systems.
This setting determines which system category
(categories) how the modem will search for a CDPD
system among the two system category choices. Refer to
on page 2-18 for detailed
information.
SPI, SPNI, WASI
Configures all identification values for a particular system
or Wireless IP network. Also called Service ID parameters.
Service ID Pref
Configures the preferences for the service ID parameters.
Refer to
detailed information.
Channel Hot List
Configures a list of channels upon which the modem will
attempt to find service. This user-configurable list can
contain up to 32 channels, listed in the particular order that
you want the modem to use.
Hot List Operation
Configures how the Channel Hot List entered is used.