Symbol Technologies SPT 1700 - Manual (Page 291)

14-25
Applications: Preferences
To create a login script:
1. Tap the Script button in the Details screen to open the Login Script screen.
2. Tap the End pick list to open the Command list.
3. Tap the command(s) you want from the Command list.
4. If the command requires additional information, a field displays to the right of it for
you to enter the information. The following commands are available:
Wait For Tells your SPT 1700 terminal to wait for specific characters from the
TCP/IP server before executing the next command.
Wait For
Prompt Tells your SPT 1700 terminal to wait for a prompt before executing the
next command.
Send Transmits specific characters to the TCP/IP server to which you are
connecting.
Send CR Transmits a carriage return or LF character to the TCP/IP server to
which you are connecting.
Send User ID Transmits the User ID information entered in the User ID field of the
Network Preferences screen.
Send
Password Transmits the Password entered in the Password field of the Network
Preferences screen. If you did not enter a password in the Password
field, this command prompts you to enter one. The Password
command is usually followed by a Send CR command.
Delay Tells your SPT 1700 terminal to wait a specific number of seconds
before executing the next command in the login script.