Samsung Flight II SGH-A927 - Manual (Page 148)

144
Voice Recognition
Nuance Voice Recognition software is an advanced speech
recognition software used to activate a wide variety of functions
on your phone. Nuance software automatically voice activates
(up to 2,000 contacts) for voice dialing and searching. No
pre-recording or training needed. Speak a contact name
naturally to dial and use your voice to look up contacts, launch
applications, and navigate phone menus.
1. Touch ➔ Tools ➔ Voice recognition.
2. At the voice prompt, say a command. The list of available
commands is listed below.
Note: This list of voice commands is briefly displayed.
Say a Command Options
• Call : dials a name or number listed in your contact list.
If multiple numbers exist (such as, home, work, or other), say the
name and the number type (location).
• Send Text to : displays the Messaging Create screen.
• Lookup : allows you to use a voice command to locate and
display contact information stored in the Contacts list.
• Go To
• Check : lets you check your phone's status in the same report
(Status, Messages, Missed Calls, Time, Signal strength, Network,
Battery, My Phone Number, and Volume).
While the Say a command screen displays, you have two options:
• Tutorial: provides examples of how to use the voice commands.
• Settings: lists the settings for voice command software such as:
Confirmation, Adaptation, Audio Modes, Speakerphone, and About.
If the phone does not recognize your command, the Command
not recognized screen displays with two options:
• Help: provides instructions on how to use voice commands.
• Restart: touch and try the command options again.
Speak clearly when giving your command. There is no need to
speak slowly or with added emphasis. The voice recognition
software has been optimized to understand your speech in its
natural form. If it does not recognize your command after a few
seconds, a voice prompt asks you to “try again”. If it does not
recognize your command again, the Command not recognized
screen displays “Try again?”. Say or touch Yes or No.
You must end your current Voice Commands call before you can
make another call using Voice Commands. To make a 3-way call,
only the first call can be made using Voice Commands.