Sanyo DHX4852 - Manual (Page 79)

1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
3-31
Control of W-2WAY ECO-i SYSTEM
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
3. Timer Remote Controller
4. Set the program pattern.
(program step 3)
There are 4 program patterns.
Pressing
/ repeats the following display patterns.
Pattern 1
The indoor unit starts operation at the programmed
time.
Pattern 2
The indoor unit stops operation at the programmed
time.
Pattern 3
The indoor unit starts operation at the programmed
time and changes the temperature settings.
Press / to change the temperature setting.
Pattern 4
The indoor unit changes the temperature setting at
the programmed time.
Press / to change the temperature setting.
Pattern 1
Pattern 2
Pattern 3
Pattern 4
Weekly Program Function (Continued)
Select the program pattern and press . The program timer setting is confirmed and the unit enters the confirmation mode .
Note
If you press during the setting, it returns to the program confirmation mode.
If there is no operation made for 3 minutes during the setting, it returns to the normal mode.
In this case, all the settings in progress will be invalid.
TD831138-02_W-2WAY.indb 31 2007/07/26 14:31:38