Siemens 2011 User Manual
Page 94
Short cuts
83
kap17a.fm5
18.7.99
Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1-
Starting a short cut
If one or more short cuts have been created, you can se-
lect them and start them when you are both off-line and
on-line (after pressing the Talk key).
(
t means: scroll with
u
,
confirm with
x
)
Z
OK
The active status is shown on the display until the short
cut is executed. A typical message would read "Shortcut
active: unit check".
The display message will only be interrupted if, for exam-
ple, the user is requested to enter the PIN.
Default short cuts
A list of default (system) short cuts is already loaded in
your short cuts list. The list contains the following short
cuts:
(
t means: scroll with
u
,
confirm with
x
)
Z
OK
All of the default short cuts can be loaded into the short
cuts list by pressing
. You can quit the procedure by
pressing
. The system short cuts are arranged in
alphabetical order in an existing short cuts list.
.t Short Cut
x
Select the desired short cut from the list and call up the
Start menu option.
u
t Start
Z
W
Name
Sequence
Meaning
Total units
S#83C*BS
Check total call charges for all handsets
Unit check
S#22BS
Check call allowance account
Call Barring off
S#84CB0S
Switch off call barring
Call Barring on
S#84CB1S
Switch on call barring
Base lock
S#24CBS
Switch base lock on/off
Base Tone Ringer
S#*6BS
Change base ringer volume
Base Ringer Vol.
S#*5BS
Change base tone ringer
.t
Short Cut
u
t DefaultShortCuts
W
LOAD
CANCEL