Siemens 2011 - Manual (Page 59)

Important basic settings
48
kap09.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1-
Analog trunks
For operating your Gigatset 2011 in a telephone system
for through connection to the public telephone network
you must set:
● the analog trunk
● the pause length after the analog trunk (if a pause is
necessary after entry of the analog trunk)
If the telephone system is connected as a subsystem to
a main system, you must set the:
● the analog trunk
● the MSI
● the pause length after the analog trunk/MSI
Entering the analog trunk and the MSI
The analog trunk and MSI have one to three characters
and can comprise the digits @ to 6 and the : , # ,
and R keys.
( t means: scroll with u
, confirm with x
) Z OK
For the pause length to be entered after the an-
alog trunk/MSI, please consult the documenta-
tion supplied with your telephone system.
.t Service Activate the Service menu item
#@ Start the setting procedure.
o
Enter the four-digit base code (factory default: “0000“)
(➔ page 43).
x Select the analog trunk.
or
x x Select the MSI.
o
Enter the analog trunk or the MSI. If more than one ana-
log trunk or MSI is available, you can enter the next analog
trunk/MSI by pressing u .
u Save the setting.
REDIAL
REDIAL REDIAL
REDIAL
SET